Intended Use; Description - SATA jet 4800 K spray mix Mode D'emploi

SATAjet 4800 K spray mix Operating Instructions
US
Improper use of the paint spray gun can lead to loss of explosion protec-
tion.
→ Do not use paint spray gun in explosive atmospheres classified as Ex
Zone 0.
→ Do not use any solvents or cleaning agents with an homogenized
hydrocarbon base.
The paint spray gun is approved for use / storage in potentially explosive
atmospheres classified as Ex Zone 1 and 2.
Zone code:
Ex II 2 G T60°CX
EX
II
2
G
T60°CX
2.4. Safety Instructions
■ Before use, always check the paint spray gun for proper function and
for any leaks.
■ Never point the paint spray gun at animals (including humans).
■ Never use the paint spray gun if damaged or if parts are missing.
■ In the event of damage, immediately discontinue use of paint spray gun
and disconnect from compressed air circuit and material supply.
■ Observe safety precautions.
■ Observe accident prevention regulations BGR 500.

3. Intended Use

The paint spray gun is intended for the application of paint and varnish as
well as other suitable, fluid materials on suitable substrates using airless
paint-spray technology.

4. Description

The paint spray gun consists of the following main components:
■ Air nozzle (position infinitely adjustable) [1-13]
■ Material nozzle, located in air nozzle (material nozzle not included)
[1-13].
■ Trigger with lock [1-6]
■ Gun body [1-7]
■ Nozzle head with material intake tube [1-11]
606
EX sign
Equipment category
Device category
Gas category
Temperature classification