Features And Controls; Control Functions - Briggs & Stratton Zero Turn Rider Manuel D'utilisation

Features and Controls

Control Functions

The information below briefly describes the function of individual controls. Starting, stopping, driving, and mowing
require the combined use of several controls applied in specific sequences. To learn what combination and sequence
of controls to use for various tasks see the Operation section.
Ground Speed Levers
These levers control the ground speed and direc-
tion of the rider. The left lever controls the left rear drive
wheel and the right controls the right rear drive wheel.
Moving a lever forward increases the FORWARD speed
of the associated wheel, and pulling back on a lever
increases the REVERSE speed.
The further a lever is moved away from the neutral posi-
tion the faster the drive wheel will turn.
See the Operation section for steering instructions.
14
Engine Speed / Choke Control
(Briggs & Stratton Engines)
Move the engine speed / choke control to the FAST
position to increase engine speed, and to the SLOW
position to decrease engine speed. Move the engine
speed / choke control past the FAST position to the
CHOKE position to start a cold engine. A warm engine
may not require choking.
NOTE: Always operate the rider with the engine speed
control in the FAST position.