Commissioning, Operation - WIKA WUD-20 Mode D'emploi

4. Transport, packaging and storage / 5. Commissioning, operation
Avoid exposure to the following factors:
Direct sunlight or proximity to hot objects
■
Mechanical vibration, mechanical shock (putting it down hard)
■
EN
Soot, vapour, dust and corrosive gases
■
Store the instrument in its original packaging in a location that fulfils the conditions listed above. If the
original packaging is not available, pack and store the instrument as described below:
1. Place the protection cap onto the process connection.
2. Pack the instrument in an antistatic plastic film in accordance with clean room specifications.
3. Place the instrument, along with the shock-absorbent material, in the packaging.
4. If stored for a prolonged period of time (more than 30 days), place a bag containing a desiccant inside
the packaging.

5. Commissioning, operation

DANGER!
Potentially explosive atmosphere
Explosion
▶
▶
▶
12
Only use transmitters which are marked as suitable for use in hazardous areas.
Before commissioning, ensure that the surrounding environment is free from any
hazardous atmosphere.
If there is any doubt, obtain a hot-working permit.
WIKA operating instructions Ultra High Purity transducer, model WUD-2x