Using The Smart Control Unit - SFA SANIFOS 110 Notice D'installation

UK

6.6 Using the SMART Control unit

Overview
Power indicator
Display of motor
activation 1 and 2
Validation of
the task
Navigation
Return
Navigating the menu
Previous Menu
Entering the menu
Back to home
screen
Motor activation/deactivation
In the case of maintenance
replacement of a motor, it is possible to
deactivate each motor independently.
Checking the alarms
! ALARME ! AC 10:46:14
U=230V
I1=0.0A
I2=0.0A
ALARME
P1 P2
! ALARME ! AC 10:45:45
ALARME X
Pas de AC
Debut a:10:45
132
P1
Engine shut-down
or
P1 P2
➤
A special window giving the alarm type and the alarm time remains open as long as the fault that
generated the alarm is present.
As soon as the fault disappears, return to the general screen on which an alarm notification appears. To
remove the alarm notification, simply press one of the two forced-on buttons. Details of the alarms can
be consulted in the alarm log.
AC 10:45:55
U=235V
I1=0.0A
I2=0.0A
P2
P1
➤
P2
Power Indicators
AC 10:47:10
››
JOURNAL
P1
➤
P2
AC 10:46:27
Press and hold for 5 seconds
U=234V
to deactivate the motor. The
I1=0.0A
LED turns red and a cross is
I2=0.0A
displayed on the shut-down
engine.
Press again for 5 seconds to
reactivate the motor, the led will
turn green and the cross will
P1
turn off.
P2
Time
Power supply
voltage
Motor Intensity
Forced operation of the
motors
Next menu