Tecnical Specifications - Fracarro FRPRO10HD Instructions D'emploi

16 letters on 2 row display, built-in keypad for programming
Green LED that shows that the unit is working properly
3 LEDs that show the remote power supply is enabled in the UHF inputs
USB 2.0 port to load/save configuration file by means of a USB pen drive
RJ45 port for updating firmware
Thermal compensation of the gain for the UHF inputs
Self-leveling of signals levels
Cluster selectivity (dB)
Separation between UHF inputs (dB)
Connectors
Return loss IN/OUT (dB)
Supply voltage (Vac)
Consumption (A)
Protection degree
Operating temperature
Dimensions (mm)
Technical data is nominal values and refer to an operating temperature of 25° C.
Frequency (MHz)
Cluster no.
UHF input combination
Gain (dB)
Input gain adjustment (dB)
Cluster level adjustment (dB)
by step of 1 dB
Final gain adjustment (dB)

8. TECNICAL SPECIFICATIONS

General features of the FRPRO10HD
FRPRO10HD
20dB @ 10MHz
75 Ω (Tipo F)
220-240 @ 50-60Hz
230X230X50
UHF1 UHF2
470÷862 470÷862
10 Clusters : each one made up of 1
to 6 adjacent channels
Flexible and programmable
8÷10 5÷10
Selectable Selectable
cell cell
40 40
20 20
For each cluster
20 20
44
≥ 30
≥ 10
1.4 A
IP20
-5 ÷ 55 °C
INPUTS
UHF3 BIII+FM+DAB
470÷862 87÷320
1÷4
Connected
cell
5÷10
Selectable
cell
BIII 40
40
FM 43
20
20
20
-
-
20
-