Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
FR PRO software can be downloaded from the website www.fracarro.com.
Minimum requirements for the system:
•
Dotnet Framework v.2 or later
•
Windows XP Service Pack 2 or later (Windows Vista, 7 e 8)
Using the FRPRO software, you can create a configuration of the clusters (initial channel and end channel,
channel type, cluster level, etc.) and of the other inputs by working from the computer. The configuration file
will be saved in a USB pen drive and then it will be loaded into the Profiler unit and/or a copy of the configu-
ration can be saved in the hard disk.
Use the Print function to print the configuration.
Note:
To program the Profiler, you can neglect the settings relevant to the input and output levels as the Profiler
unit is equipped with the self-alignment function that automatically sets these gain values in order to equalize
the level of all clusters by optimizing the noise figure and the output level of all signals. See paragraph 5.4.
After launching the FR PRO software, set the product model that you want to program. Select the "File -
New" menu and choose the product model you want to program from the pop-up window.
The following is a description of the FR PRO software window:
6. SOFTWARE FOR PROGRAMMING
40
Publicité
Table des Matières
