Fracarro FRPRO10HD Instructions D'emploi page 39

5.5 FINAL GAIN MENU
The "FINAL GAIN" menu allows for the modification the output level of all mixed signals with a gain that
varies from 0 to 20 dB.
The final gain performs the amplifications of all UHF inputs and for the B.III+DAB input.
5.6 REMOTE POWER SUPPLY MENU
The remote power supply can be enabled individually for the three inputs UHF1, UHF2 and UHF3.
From the "REMOTE POWER SUPPLY - 12V/24V" menu, select the voltage you want (12V or 24V DC); this
setting is valid for all the UHF inputs; therefore, it is not possible to set the remote power supply at 12V in
one input and at 24V in another input.
The maximum supplied power at 12V is 250mA, at 24V maximum 100mA.
The activation of the UHFx input remote power supply will be signaled by the red LED next to the UHFx input.
39