Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
5.2.3 USB MEMORY MENU
LOADING THE CONFIGURATION FILE
By means of a pen drive, a confi guration that was previously memorized or saved from a PC can be loaded
into the "CONTROL UNIT - UBS MEMORY".
When the display shows "insert USB," insert the pen drive and press the
Use the DOWN arrow to scroll down the fi les within the pen drive and select the confi guration fi le that you
Use the DOWN arrow to scroll down the fi les within the pen drive and select the confi guration fi le that you
want by pressing the
the operation is completed.
It is possible to load the confi guration of any model of the FRPRO series; this way, all settings relevant to the
parameters of the destination model will be maintained.
Notes:
•
If the message "loading OK" is not displayed, repeat the procedure.
•
The Profi ler unit does not accept a fi le longer than 16 digits. If a longer fi le is uploaded, the Profi ler unit
will display the message "Loading error."
SAVING THE CONFIGURATION FILE
To save a confi guration from the Profi ler unit to the pen drive, use the "SAVE AS" menu.
To save a confi guration from the Profi ler unit to the pen drive, use the "SAVE AS" menu.
When the message "insert USB" appears, insert the pen drive and press the
the Profi ler will propose the name "Confi guration1." To change the fi le name, use the keyboard and the left/
the Profi ler will propose the name "Confi guration1." To change the fi le name, use the keyboard and the left/
right arrows to move along the letters (the entered letters can be cancelled by pressing the
right arrows to move along the letters (the entered letters can be cancelled by pressing the
Press the
key to save the Profi ler confi guration onto the pen drive.
Notes:
•
Accepted formatting for the pen drive: FAT-12, FAT-16, FAT-32 (MS-DOS).
•
The pen drive cannot have two or more partitions and/or a proprietary fi le system.
•
The confi guration fi les must be saved in the root (principal directory) of the disk (the Profi ler does not
allow access to the sub-folders).
•
The name of the confi guration fi le must not exceed 16 letters ( "cpr" extension not included)
•
Special symbols such as *, /, \, !, ... etc. are not accepted.
key to load the confi guration into the Profi ler unit. A message will be displayed when
34
key.
key.
key).
Publicité
Table des Matières
