Input Menu - Fracarro FRPRO10HD Instructions D'emploi

5.3 INPUT MENU

From the "INPUT" menu, you can program the UHF clusters and the amplification level of B.III+DAB+FM
input.
5.3.1 PROGRAMMING THE UHFx INPUT AND ASSOCIATED CLUSTERS
Each cluster shall be individually programmed by setting the cluster's initial channel, the cluster's initial
channel, the cluster's end channel, the channel type (analog or digital or cluster OFF), the cluster gain and
the UHF input associated to the cluster.
To program each cluster, refer to the following flow-chart:
35