Installation; Information On Installation - Knick 830 R Mode D'emploi

5

Installation

5.1

Information on Installation

Type S1/S2
Type R
E-86
NOTICE!
Installation/deinstallation of the device
shall be carried out by trained and quali-
fied personnel in accordance with this user
manual and as per applicable local and
national codes.
Be sure to observe the technical specifica-
tions and input ratings during installation!
The indicator optionally provides min/
max outputs.
Ratings:
• Option 290: max. 60 V DC, 350 mA
• Option 291: max. 60 V DC, 150 mA
0.7 W / 0.35 W
To connect the indicator, you must remove
the cover.
CAUTION!
Protect against ESD when the cover is
open!