Troubleshooting; Error Message - Knick 830 R Mode D'emploi

8

Troubleshooting

8.1

Error Message

Measuring Mode
Error Prio- Error
message rity
Er.01 3 Loop current < 3.8 mA
or
loop current < 0.3 mA
Er.02 3 Loop current > 22 mA
Er.03 2 AD converter overdrive, loop
current > approx. 24 mA
Er.04 6 Span > 10,050 counts
Er.05 5 Display ranges exceeded
The error message is displayed alternately
with the measured value.
If no valid measured value can be deter-
mined, dashes are displayed.
If more than one error has occurred, the
message with the highest priority is dis-
played first (highest priority = 1).
Remedy
Check loop current and
remedy error.
Check loop current and
remedy error.
Check loop current and
remedy error.
Adjust settings.
Adjust settings.
E-117