Knick 830 R Mode D'emploi page 115

CODE Menu
• Activate parameter mode.
• Hold down the key for 2 sec.
• Select CODE menu and confirm.
A passcode can be entered to lock
parameter setting and protect the
indicator against tampering.
• Enter desired passcode.
• Select and edit digits.
• To confirm the entry, hold down this
key for 5 sec (until CODE flashes).
With the passcode 0000, passcode
protection is disabled.
• End of CODE entry
• Exit parameter menu.
When the passcode has been lost, the
device must be sent in to the manufacturer.
E-115