Knick 830 R Mode D'emploi page 114

INIT Menu
• Activate parameter mode.
• Hold down the key for 2 sec.
• Select INIT menu and confirm.
The indicator parameters will be automati-
cally reset to their factory settings.
All parameter settings (except the pass-
code) will be lost!
• To start INIT, press and hold down his
key for 5 sec.
The bargraph is moving during the setting
procedure.
• After approx. 20 sec the display flashes.
The parameters have been reset to their
factory settings.
• Exit parameter menu.
E-114