Festo DDPC Notice D'utilisation page 26

DDPC
Size
Vibration resistance in accordance
with IEC 68, Part 2-6
Continuous shock resistance in
accordance with IEC 68 Part 2-82
CE marking (see declaration of conformity)
è www.festo.com/sp
Information on materials
Cover
Seals
Cable sheath
Piston rod
Screws
Sensor cover
Sensor head
Plug housing
Cylinder barrel
Basic weight with 0 mm stroke
Additional weight per 10 mm stroke [g]
3) The device is intended for use in an industrial environment. Outside of industrial environments, e.g. in commercial and mixed-res­
idential areas, actions to suppress interference may have to be taken.
Tab. 6
26
80
0.35 mm travel at 10 ... 60 Hz,
5 g acceleration at 60 ... 150 Hz
± 30 g at 11 ms duration;
5 shocks per direction
3)
In accordance with EU EMC Directive
Wrought aluminium alloy
Nitrile rubber, polyurethane
Polyurethane
High-alloy steel
Steel
Aluminium
Polyacetal
Polyester
Wrought aluminium alloy
[g] 3053
87
100
4330
95
Festo – DDPC – 1505a English