Drain Connection - Bosch 800 Série Notice D'installation

23
• Connect the dishwasher water supply line to the water shut off valve.
If one isn't already in the supply line, install one (not provided).
• You will need to use an approved dishwasher water supply line with
the correct fittings for this connection.
• After all connections are made, turn on the hot water and check for
leaks.
IMPORTANT NOTES about your drain connection:
• If local ordinance require an air gap, install it according to the manu-
facturer's instructions.
• If the dishwasher drain hose is to be connected to a disposer dishwasher
drain connection, remove the plug from the disposer's dishwasher drain
connection.
• The dishwasher drain hose must have one place along its length that is
securely attached 33" (508 mm) above the cabinet floor.
• The drain hose length can be extended if necessary. The maximum
length of the drain hose, including the hose leading to the air gap, is
150" (380 cm).

Drain Connection

25