Tools & Materials - Bosch 800 Série Notice D'installation

Tools and Materials Needed
ø1/16 in
(2 mm)
Tape Measure
Hole Saw
Drill
Adjustable Wrench
Pliers
Wire Cutter Wire Stripper Needle Nose Pliers
Level
Phillips Screwdriver Flat Screwdriver
Elbow connection with 3/4" female hose threads on one end and fits
your water supply line (copper tubing, compression fitting, or braided
hose) on the other.
Electrical Supply Cable - Minimum #14 AWG, 2 conductor, 1 ground,
insulated copper conductors rated 75° C or higher.
Only needed if house electrical line is not adequate.
Hot Water Supply Line - Minimum 3/8" O.D. copper tubing or metal
braided dishwasher supply line.
Only needed if house water supply line is not sufficient.
Shut-off valve and fittings appropriate for hot water supply line
(copper tubing/compression fitting, or braided hose).
UL listed conduit connector or strain relief is required if you attach the
field wiring directly to the terminal block.
6