Setting The Kuro Link Mode; Before Using Synchronization; Synchronized Amp Mode; Synchronized Amp Mode Operations - Pioneer DCS-585 Mode D'emploi

KURO LINK

Setting the KURO LINK mode

Choose whether to set this unit's KURO LINK
function ON or OFF. You will need to set it to
LINK ON to use the KURO LINK function.
• When using a TV that does not support the
KURO LINK function, set this to LINK OFF.
1 Press SHIFT+SETUP.
Use / to select HDMI SET then press
2
ENTER.
Use / to select KURO LINK, then
3
press ENTER.
Use / to select the setting then press
4
ENTER to confirm.
• LINK ON – Enables the KURO LINK
function.
• LINK OFF – The KURO LINK is disabled.
Synchronized operations cannot be used.

Before using synchronization

Once you have finished all connections and
settings, you must:
1 Put all components into standby mode.
2 Turn the power ON for all components,
with the power for the flat screen TV being
turned on last.
3 Choose DVD/CD and see if video output
displays properly on the screen or not.

Synchronized amp mode

The synchronized amp mode can be set from
the KURO LINK-compatible TV's remote
control. See the explanation below for
operations in the synchronized amp mode.
These functions are set from the TV's menu
screen. For more information, refer to the
operating instructions of the KURO LINK-
compatible TV.

Synchronized amp mode operations

When using the synchronized amp mode, the
KURO LINK-compatible component
connected to this unit operates in sync as
described below.
• The unit's volume can be set and the sound
can be muted using the TV's remote control.
• When the TV's power is set to standby, the
unit's power is also set to standby. (The
unit's power is automatically turned off
when the TV's power is turned off while a
video DVD is being played on the unit.
However, the unit's power may not turn off
automatically in some cases, for example,
if you are listening to a CD or radio and turn
off the output device.)
• The unit's input switches automatically
when the TV's channel is switched.
• The synchronized amp mode remains in
effect even if the unit's input is switched to
a function other than the DVD/CD.
The operations below can also be used on
Pioneer KURO LINK-compatible flat screen
TVs.
• When the unit's volume is adjusted or the
sound is muted, the volume status is
displayed on the flat screen TV's screen.
• When the OSD language is switched on
the flat screen TV, the unit's language
setting also switches accordingly.

Canceling synchronized amp mode

• When the synchronized amp mode is
canceled, the unit's power turns off if you
were viewing a TV program on the TV.
• When in the synchronized amp mode, the
synchronized amp mode is canceled when
the unit's power is turned off. To turn the
synchronized amp mode back on, select
the synchronized amp mode using the TV's
remote control.
• When in the synchronized amp mode, the
synchronized amp mode is canceled if an
operation that produces sound from the TV is
performed from the TV's menu screen, etc.
13
49
En