Initial Settings Menu Using The Initial Settings Menu; Digital Audio Out Settings; Video Output Settings - Pioneer DCS-585 Mode D'emploi

11 Initial Settings menu
Chapter 11
Initial Settings menu
Using the Initial Settings menu
The Initial Settings menu provides audio and
video output settings, parental lock settings,
and display settings, among others.
If an option is grayed out it means that it
cannot be changed at the current time. This is
usually because a disc is playing. Stop the
disc, then change the setting.

Digital Audio Out settings

DCS-FS30 only
Setting
Dolby Digital Out
DTS Out

Video Output settings

Setting
TV Screen
(See also Screen sizes
and disc formats on
page 55.)
Note
1 • In the table, the default setting is shown in bold: other settings are shown in italics.
• Some settings, such as TV Screen, Audio Language and Subtitle Language may be overridden by the DVD disc. Often
these settings can also be made from the DVD disc menu.
• The AV Connector Out setting only needs to be set if you have connected this player to your TV using a SCART cable.
• The HDMI Resolution and HDMI Color settings only need to be set if you connected this player to an HDMI-compatible
component using the HDMI connector.
2 This setting can only be used when you are connected via HDMI and have the HDMI resolution set to 1920x1080p, 1920x1080i
or 1280x720p. When using this setting, only the HDMI connection is available.
38
En
Option
Dolby Digital
Dolby Digital > PCM
DTS
DTS > PCM
Option
4:3 (Letter Box)
4:3 (Pan & Scan)
16:9 (Wide)
16:9 (Compressed)
1 Press DVD/CD.
2 With playback stopped, press HOME
MENU and select 'Initial Settings'.
Use /// and ENTER to select the
3
setting and option you want to set.
All the settings and options are explained on
the following pages.
What it means
Dolby Digital encoded digital audio is output when playing a
Dolby Digital DVD disc.
Dolby Digital audio is converted to PCM audio before being
output.
DTS encoded digital audio is output when playing a DTS disc.
(Noise will be output if your amplifier/receiver is not
compatible with DTS audio.)
No digital audio is output when playing a DTS disc. DTS audio
is converted to PCM audio before being output.
What it means
Set if you have a conventional 4:3 TV. Widescreen movies are
shown with black bars top and bottom.
Set if you have a conventional 4:3 TV. Widescreen movies are
shown with the sides cropped so that the image fills the screen.
Set if you have a widescreen TV.
Set if you have a widescreen TV. 4:3 material is shown with
black bars on either side of the screen.
Initial Settings
1
2