Clearing Pairing - Pioneer DCS-585 Mode D'emploi

Other connections
When Bluetooth wireless technology device is
connected:
Bluetooth wireless technology device name
appears in the system display.
When Bluetooth wireless technology device is
not connected:
NODEVICE appears in the system display.
3 Start playback of music contents stored in
Bluetooth wireless technology device.
The following operations are now possible for
Bluetooth wireless technology devices, using
the button at the top of the system and remote
2
controller.
Button What it does
/
(system) Starts normal playback and
pauses/unpauses playback.

Starts normal playback.
(remote control)

Pauses playback.
(remote control)

(system/ Stops playback.
remote control)

Press to start fast reverse
(remote control) scanning.

Press to start fast forward
(remote control) scanning.

Skips to the start of the
(remote control) current file, then previous
files.

Skips to the next file.
(remote control)
Note
1 The system can display alphanumeric characters only. Other characters may not be displayed correctly.
2 • Bluetooth wireless technology device should be compatible with AVRCP profile.
• Depending on Bluetooth wireless technology device you use, operation may differ from what is shown in this table.
3 • Clearing should be done with Bluetooth wireless technology device being disconnected.
• When you connect Bluetooth wireless technology device again after clearing, repeat the pairing steps referring to Pairing
Bluetooth ADAPTER and Bluetooth wireless technology device on page 46.

Clearing Pairing

1
then press ENTER.
1
2
ENTER.
3
The Bluetooth
registered trademarks owned by Bluetooth
SIG, Inc. and any use of such marks by Pioneer
Corporation is under license. Other
trademarks and trade names are those of their
respective owners.
3
Press SHIFT+SETUP, select BT SETUP,
Use / to select PAIR CLR, then press
When CLR OK appears, press ENTER.
®
word mark and logos are
12
47
En