AEG NDR 4156 DAB+ Mode D'emploi page 46

English
46
46
- STEREO OR MONO: Each radio station broadcasting
in stereo will be played in stereo. (Only in earphone
mode)
- MONO ONLY: Each radio station is played in mono,
regardless of the broadcast signal.
• SEEK THRESHOLD: Set the threshold for the search.
• STEREO THRSHLD: No function in this device.
DAB + FM Menu (MAIN MENU)
The following submenus can be found in the MAIN MENU
menu. In FM mode, only a part of the following menu items
is available (see page 4).
• TIME SETUP: Set the time and the date manually. Set
the time and date manually here. You can also change
the settings for automatic update and the time display
format here.
- SET CLOCK: Here, you can set the time manually.
- SET DATE: Here, you can set the date manually.
- AUTO UPDATE: Here, select the source from which
the automatic update of time and date should be
carried out. Select from: Update of radio (FROM
RADIO) and no update (NO UPDATE).
- SET 12 / 24 HOUR: Select between 24 hour and 12
hour display.
NOTE: In 12 hour display
AM = morning, PM = afternoon appears.
• ALARMS: See section "Alarm function".
• SLEEP: See section "Delayed shut-off (SLEEP)".
• EQ: Set the sound to suit your requirements.
• PRUNE STATIONS: It may be that you can no longer
receive some stations after a station scan or change
of location. With this function you can delete these
stations from the reception list. Confirm with the AUTO
SCAN / ENTER button.
• STATION ORDER: Allows you to set the criteria after
which the stations are to be sorted during the scan.
- MULTIPLEX: The stations are sorted according to the
received program packages.
- ALPHANUMERIC: The radio stations which names
include a number will rank before the station names
consisting of letters. The stations with letters are sorted
in ascending order according to the alphabet.
- ACTIVE: Stations which are currently broadcasting a
program will be sorted into the first positions.
• DRC: short for Digital Range Control (dynamic range).
The term DRC describes the ratio between the quietest
and the loudest sound. If the dynamic range is very high
there are very soft sounds as well as very loud sounds.
Under some circumstances this may present a problem
with playback. Let us assume that you are listening to a
radio station in a relatively loud environment. By increas-
ing the volume you can play the quiet sections louder.
This however has the disadvantage that the loud sections
NDR 4156 DAB+_K2
become uncomfortably loud. It makes sense here to
reduce the dynamic range. Select between the options:
- DRC OFF: The dynamic range is not reduced.
- DRC LOW: The dynamic range is slightly reduced.
- DRC HIGH: The dynamic range is sharply reduced.
• FACTORY RESET: Press the AUTO SCAN / ENTER button
if you want to reset the device to the default factory
settings. All settings which you have made will be lost.
• SW VERSION: Here, you can display the Software
Version of the device.
Alarm function
You can set the unit to turn on at a specified time. Two wake-
up times can be set. Please refer to the menu overview on
page 5.
Setting the Alarm Time
1. Turn the device on.
2. Press the SLEEP / SNOOZE / ALARM button. The display
shows "ALARMS".
3. Use the UP / DOWN buttons to select either "ALARM 1"
or "ALARM 2".
4. Press the AUTO SCAN / ENTER button. "ALARM DETAIL"
appears in the display. The display shows "OFF".
5. Press the AUTO SCAN / ENTER button to select the
"ON" setting.
6. Press the UP button. "TIME:" and the current set alarm
time: appear on the display. Press the AUTO SCAN /
ENTER button.
7. Set the alarm time with the UP / DOWN buttons. Confirm
the setting of the hours and minutes respectively with the
AUTO SCAN / ENTER button.
8. Press the UP button. The display will indicate "DAYS:".
Press the AUTO SCAN / ENTER button.
9. Use the UP / DOWN buttons to select when the alarm
is to be enabled. The options include: DAILY, ONCE,
WEEKDAYS, WEEKENDS. Confirm your selection by
pressing the AUTO SCAN / ENTER button.
10. Press the UP button. The display will indicate "MODE:".
Press the AUTO SCAN / ENTER button.
11. Select the desired wake-up source. Select from: DAB, FM,
BUZZER (beep). Press the UP or DOWN button to select
the desired setting. Confirm your selection by pressing
the AUTO SCAN / ENTER button.
NOTE:
If DAB or FM reception is not available, you are woken
by the buzzer. The display also shows "ALARM".
12. Press the UP button. The display will indicate "LAST
LISTEND:". Press the AUTO SCAN / ENTER button.
15.06.16