Wella Professionals CLIMAZON2 Mode D'emploi page 71

7 Changing appliance and treatment defaults
Figure 24
Figure 25
7.1.3 Setting melodies and volume
1. Press SETTING button g.
2. Scroll to page 2/7 with the functional button d beside <Next>.
Setting melodies:
3. Press the function buttons d beside the word <Melody>.
➥ The different melodies are shown.
➥ The selected / displayed <Melody> is activated in the appliance.
Setting volume:
4. Press the function buttons d beside the word <Volume>.
➥ The bar display changes in increments 1 - 4.
➥ The selected / displayed <Volume> level is activated in the appliance.
5. Press the right functional button d beside <Next> repeatedly until <Save>
appears, and confirm.
7.1.4 Changing the <Start mode>
1. Press SETTING button g.
2. Scroll to page 3/7 with the functional button d beside <Next>.
➥ <Manual Start> appears in the display f.
There are two different appliance start modes for you to choose from:
• Manual Start = the selected treatment programme does not start until you
enter the start command <Start>.
• Automatic Start = the selected treatment programme starts as soon as you
select the programme.
To change the setting:
3. Press the function buttons d beside the word <Manual Start>.
➥ The display switches between the two variants.
➥ The selected / displayed variant is activated.
4. Press the right functional button d beside <Next> repeatedly until <Save>
appears, and confirm.
➥ Your inputs are saved.
73