Changing Programme Settings - Wella Professionals CLIMAZON2 Mode D'emploi

6 Performing treatment
Figure 15
Figure 16
68

6.9 Changing programme settings

The settings for the treatment programmes can easily be changed with the
function buttons d, by following the menu.
6.9.1 Changing the treatment time
1. Press the function buttons d beside the treatment time displayed.
• Keeping the function buttons d pressed makes the input values change fast.
➥ The treatment time changes (the treatment time is capped for safety reasons).
6.9.2 Changing temperature setting
2. Press the function buttons d beside the <temperature symbol>.
➥ The temperature setting changes in increments 1 - 4 (the temperature setting
is capped in some treatment programmes for safety reasons).
6.9.3 Switching heating elements on and off individually
3. Press the left functional button d beside the heating element symbol.
➥ The <Heating> menu appears in the display f.
One heating element 1 remains on
• All heating elements 1 cannot be switched off at the same time.
• The heating element 1 that was last selected remains on.
4. Press the left functional button d beside the cross-shaped element symbol.
➥ The element symbol changes from black = ON to white = OFF.
• Pressing the left functional button d again switches the heating element on
again.
➥ The element symbol changes from white = OFF to black = ON.
NOTE