All Models; Model Description; Refrigerant Information - Hatco HCSBFR Série Manuel D'installation

English

All Models

Hatco Remote Hot/Cold Built-In Shelves are reliable and
versatile. Each unit has an insulated, stainless steel and
aluminized steel housing. For hot operation, a surface-
mounted, rope-style heating element distributes heat evenly
under the entire hardcoat aluminum or stone surface. For cold
operation, a copper evaporator coil wound under the entire
hardcoat aluminum or stone surface provides even chilling
from edge to edge. Hatco Remote Hot/Cold Built-In Shelves
are designed, manufactured, and tested to maintain safe food
holding temperatures.
Controls for the Remote Hot/Cold Built-In Shelves are housed
in a single, remote-mountable control enclosure. They include
a three position Power Switch and two digital temperature
controllers. The control enclosure is field connected to the
condensing unit and to the heating element.
Depending on the model, Remote Hot/Cold Built-In Shelves
are designed to be mounted to either the topside or bottomside
of various types of countertop material including stainless steel,
wood, Corian, and Swanstone.
The ecoization logo identifies products designed to reflect
Hatco's commitment to improving, protecting, and preserving
the global environment. Hatco Remote Hot/Cold Built-In
Shelves qualify for the ecoization logo through the use of eco-
friendly insulation as well as a highly efficient condensing unit.
NOTE: Stone surfaces are a simulated stone solid surface.
HCSBFR-48-S/HCSBFX-48-S
HCSSBFR-48-S/HCSSBFX-48-S
Form No. HCSRM-0817

MODEL DESCRIPTION

HCSBFR Models
HCSBFR models have a hardcoat aluminum surface and are
top mounted.
HCSSBR and HCSSBFR Models
HCSSBR and HCSSBFR models have a decorative stone
surface and are bottom mounted.
NOTE: For HCSBFR, HCSSBR, and HCSSBFR models,
all plumbing and electrical connections between the
components as well as to the electrical supply are the
responsibility of the end user and a qualified installer.
HCSBFX Models
HCSBFX models have a hardcoat aluminum surface and are
top mounted. They are not supplied with a condensing unit.
HCSSBX and HCSSBFX Models
HCSSBX and HCSSBFX models have a decorative stone
surface and are bottom mounted. They are not supplied with a
condensing unit.
NOTE: HCSBFX, HCSSBX, and HCSSBFX models must be
connected to an end user-supplied condensing unit.
All plumbing and electrical connections between the
components as well as to the electrical supply are the
responsibility of the end user and a qualified installer.

Refrigerant Information

All Hatco Remote Hot/Cold Built-In Shelves use R404A
refrigerant in the condenser unit.
HCSSBR-4818/HCSSBX-4818
Control Panel
(All Models)
5
Condensing Unit
(HCSBFR, HCSSBR,
HCSSBFR Models only)