Bluetooth Settings - JVC KD-AHD39 Manuel D'instructions

Bluetooth settings

You can change the settings listed in the right column
according to your preference.
~
Ÿ
Enter the Bluetooth menu.
!
Select "SETTINGS."
⁄
Select a desired setting item.
@
Change the setting.
24
(Back to the beginning)
7 AUTO CNNCT (connect)
When the unit is turned on, the connection is established
automatically with...
LAST*: The last connected Bluetooth device
ORDER: The available registered Bluetooth device found
at first
OFF: No Bluetooth device
7 AUTO ANSWER
Only for the device being connected for "BT-PHONE."
ON: The unit answers the incoming calls
automatically.
OFF*: The unit does not answer the calls automatically.
Answer the calls manually.
REJECT: The unit rejects all incoming calls.
7 MSG INFO (message info)
Only for the device being connected for "BT-PHONE."
AUTO*: The unit informs you of the arrival of a message
by ringing and displaying "RCV MSG" (receiving
message).
MANUAL: The unit does not inform you of the arrival of a
message.
7 MIC SETTING (microphone setting)
Only for the device being connected for "BT-PHONE."
Adjust the volume of the microphone connected to the
Bluetooth Adapter, [LEVEL 01/02*/03].
7 VERSION
The Bluetooth software and hardware versions are shown.
* Initial setting
Bluetooth Information:
If you wish to receive more information about
Bluetooth, visit the following JVC web site:
<http://www.jvc-victor.co.jp/english/car/>