Husqvarna 120iTK4-P Manuel D'utilisation page 9

2. Pull and release the lockout and make sure that it
moves back to its initial position .
3. Make sure that the power trigger and the lockout
move freely and that the return spring operates
correctly.
4. Start the product, see
13 .
5. Apply full speed.
6. Release the power trigger and make sure that the
cutting attachment stops fully.
Safety instructions for the cutting equipment
WARNING:
instructions that follow before you use the
product.
• Only use approved guide bar/saw chain
combinations and filing equipment. Refer to
Maintenance on page 15 for instructions.
• Use protective gloves when you use or do
maintenance on the saw chain. A saw chain that
does not move can also cause injuries.
• Keep the cutting teeth correctly sharpened. Obey the
instructions and use the recommended file gauge. A
saw chain that is damaged or incorrectly sharpened
increases the risk of accidents.
707 - 008 - 06.04.2021
To start the product on page
Read the warning
• Keep the correct depth gauge setting. Obey the
instructions and use the recommended depth gauge
setting. Too large depth gauge setting increases the
risk of kickback.
• Make sure that the saw chain has the correct
tension. If the saw chain is not tight against the guide
bar, the saw chain can derail. An incorrect saw chain
tension increases wear on the guide bar, saw chain
and chain drive sprocket. Refer to
page 24 .
• Do maintenance on the cutting equipment regularly
and keep it correctly lubricated. If the saw chain is
not correctly lubricated, the risk of wear on the guide
bar, saw chain and chain drive sprocket increases.
Safety instructions for operation
WARNING:
warning instructions that follow before you
use the product.
• Ensure that no people or animals come closer than
15 m (50 ft.) while you work. When several operators
are working in the same area the safety distance
should be at least 15 m. Otherwise there is a risk of
serious personal injury. Stop the product
immediately if anyone approaches. Never swing the
product around without first checking behind you to
make sure that no one is within the safety zone.
• Never use the product in bad weather, for instance in
dense fog, in heavy rain, strong winds, intense cold,
etc. Extremely hot weather may cause overheating
of the product. Working in bad weather is tiring and
Accessories on
Read and obey the
9