Husqvarna 120iTK4-P Manuel D'utilisation page 8

with bare feet. Put your hair up safely above your
shoulders.
• Keep first aid equipment close at hand.
Safety devices on the product
WARNING:
instructions that follow before you use the
product.
In this section the product's safety features, its purpose
and how checks and maintenance should be carried out
to ensure that it operates correctly. See instructions
Product overview on page 2 to find
under the heading
where these parts are located on your product.
The life span of the product can be reduced and the risk
of accidents can increase if product maintenance is not
carried out correctly and if service and/or repairs are not
carried out professionally. If you need further information
please contact your nearest servicing dealer.
WARNING:
defective safety components. The product's
safety equipment must be inspected and
maintained as described in this section. If
your product fails any of these checks,
contact your service agent to get it repaired.
CAUTION:
on the machine requires special training.
This is especially true of the machine's
safety equipment. If your machine fails any
of the checks described below you must
contact your service agent. When you buy
any of our products we guarantee the
availability of professional repairs and
service. If the retailer who sells your
machine is not a servicing dealer, ask him
for the address of your nearest service
agent.
8
Read the warning
Never use a product with
All servicing and repair work
To do a check of the keypad
1. Push and hold the start/stop button (A).
A
a) The product is on when the LED is on.
b) The product is off when the LED is off.
To start the SavE function on page 14 for
2. Refer to
the function of the SavE button (B).
Troubleshooting on page 21 if the warning
3. Refer to
indicator (C) is on or flashes.
To do a check of the power trigger lockout
The power trigger lockout prevents accidental operation.
When you release the handle, the power trigger and the
power trigger lockout move back to their initial position.
1. Make sure that the power trigger is locked when the
lockout is in its initial position.
C
B
707 - 008 - 06.04.2021