Spare Parts; Disposal - Wilo COE-2 MHIL Série Notice De Montage Et De Mise En Service

Masquer les pouces Voir aussi pour COE-2 MHIL Série:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 1
Faults
The contactors vibrate frequently,
frequent start-ups of the pumps
Frequent activation of the low water
protection
Automated operation defective
Non-return valve not sealed
If the fault cannot be remedied, please consult a
specialist technician or your closest Wilo customer
service agent.

11 Spare parts

Spare parts may be ordered or repair work
arranged via specialist technicians and/or Wilo
customer service.
To avoid queries and incorrect orders, all data on
the rating plate should be submitted with each
order.
Installation and operating instructions Wilo-COE-2 MHIL
Causes
Set pressure out of adjustment
Insufficient system capacity
No air in the tank
Cut-in pressure for the low
water pressure controller set
too high
Municipal water supply
pressure drops when pumps
are activated
Wires disconnected
Duty cycling module defective
Valve diaphragm defective
Remedies
Readjust.
Install a supplementary tank.
Inflate the tank or replace the vessel.
Adjust the pressure controller to the correct setting.
Adjust the low water pressure controller to the
minimum setting. If the issue persists, the municipal
water mains supply is insufficient; check the pressure
gauge reading when the pumps start up, or consult
the municipal water supplier.
Check all connections to the switchgear terminal.
Set up the bypass on the baseplate of the duty
cycling module.
Replace the valves.

12 Disposal

Lawful disposal and appropriate recycling of this
product prevents damage to the environment and
risks to health. Disposal in accordance with regu-
lations requires draining, cleaning and dismantling
of the motor pump unit. Lubricants must be col-
lected. The components of the pressure-boosting
system must be sorted according to materials
(metal, plastic and electronics).
1. To dispose of the product and its components,
you should contact public or private waste
disposal companies.
2. For further information regarding proper
disposal of the product, contact your local
authority, waste collection and treatment
service or the product's original point of sale.
For more information, visit www.wilo.com
Subject to technical modifications.
English
29

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Coe-2mhil305-dm/bcCoe-2 mhil 304 em/bc

Table des Matières