Description Of The Device; Intended Use - krispol STARCUS K06 Notice D'utilisation

Masquer les pouces Voir aussi pour STARCUS K06:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 92
It is an efficient drive with modern design intended for automatic operation of sectional garage doors.
It is available in two power versions, suitable for garage doors with a maximum area of 8 m
It is equipped with:
an amperometric system for obstacle detection - after detecting an obstacle, the drive stops the door and reverses its motion,
a function of soft start and soft stop, preventing strong jerks during opening and closing the door,
a built-in LED lamp to light the opened garage (three-minute operation),
overload protection,
an option of programming the automatic closing,
LED display for easy programming of functions.
There is a possibility of connecting:
a micro-switch of service door, which blocks the movement of the door after opening,
photocells and a function of external emergency disconnection of the drive in case of power failure.
The content of the basic set:
drive with built-in 433.92 MHz radio set,
3-channel transmitter,
rail with a belt or chain (optional)
mounting elements.
The drive should be installed at a minimum height of 2.5 m above the floor or access level.
The drive can not be used with door having openings with a diameter greater than 50 mm, edges or protruding parts that may be used
for standing or gripping.
The drive is suitable for sectional garage doors with the following parameters:
GUIDING N, L, SL, NH, E
Wn
height\width
2200
2300
2000
3160
2125
2250
2375
2500
2625
4060
2750
2875
3000
GUIDING H
Wn
height\width
2200
2300
2000
3160
2125
2250
2375
4060
2500
2625
2750
Wn - installation depth in the garage door with a drive
A - 600N, 3100mm
B - 600N, 4000mm
The drive uses electricity and in case of power failure from the mains, it may be unlocked and the door may be operated manually.
The drive with the sectional garage door is designed for use in vehicular and pedestrian applications. It should be installed in residential
buildings and it is intended solely for use in individual households. It should not be installed in doors used in public buildings.
It is unacceptable to install these doors in industrial and commercial facilitates.
The drive is designed for indoor operation. It is prohibited to install the device outdoors and in areas with potentially explosive atmospheres
or in those with the presence of flammable liquids, gases or dust.
Do not expose the drive to rain or moisture.
WARNING: Automatic drive. Unauthorised changes to the device without the
permission of the manufacturer release the manufacturer from liability
for damages.
The user meets the condition of using the device according to its intended purpose when all the requirements for compliance with
manufacturer's instructions and recommendations are fulfilled. Using the device for other purposes shall be understood as a misuse.
2400
2500
2600
2750
3000
A
B
2400
2500
2600
2750
3000
A
B
or 12.5 m
2
3250
3500
3750
4000
4250
D
3250
3500
3750
4000
4250
D
C - 1000N, 3100mm
D - 1000N, 4000mm

3. Description of the device

3.1. Intended use

.
2
4500
4750
5000
5250
5500
C
4500
4750
5000
5250
5500
C
5750
6000
5750
6000
17
EN

Hide quick links:

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Starcus k10

Table des Matières