HBM C16i Série Notice De Montage page 21

C16i...
Residual dangers
The scope of supply and performance of the load cell covers only a small area
of weighing technology. In addition, equipment planners, installers and opera-
tors should plan, implement and respond to the safety engineering consider-
ations of weighing technology in such a way as to minimize residual dangers.
Prevailing regulations must be complied with at all times. There must be refer-
ence to the residual dangers connected with weighing technology.
In these mounting instructions residual dangers are pointed out using the fol-
lowing symbols:
Symbol:
Meaning: Highest level of danger
Warns of a directly dangerous situation in which failure to comply with safety
requirements will lead to death or serious physical injury.
Symbol:
Meaning: Possibly dangerous situation
Warns of a potentially dangerous situation in which failure to comply with
safety requirements can lead to death or serious physical injury.
Symbol:
Meaning: Possibly dangerous situation
Warns of a potentially dangerous situation in which failure to comply with
safety requirements could lead to damage to property, slight or moderate
physical injury.
A1461--1.2 de/en/fr
DANGER
WARNING
ATTENTION
21
HBM