Cleaning The Hepa Filter And Nylon Filter; Troubleshooting - Graef Krümelchef KC502 Instructions D'utilisation

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 28

Cleaning the Hepa filter and nylon filter

• Dismantle the filters.
• Brush off the coarsest dust.
• Clean the nylon filter under running, warm water. Do not use cleaning agents.
• Using a small brush, clean the Hepa filter cautiously. Do not hold the Hepa
filter under water.
• Let the nylon filter dry before inserting the filter again.
Depending on user frequency, the Hepa and nylon filter should be cleaned
at least every 3 weeks.
Do not insert the nylon filter until it has completely dried, otherwise it can
come to damages on the unit.
Replace the filters once the suction force diminishes and cleaning does not
show any improvement.

Troubleshooting

Symptom
The unit does not char-
ge.
Possible reason
The battery pack has
not been connected to
the socket.
The battery pack has
not been correctly in-
serted into the unit.
Solution
Insert the plug into the
socket.
Insert the charging unit
into the connection pro-
vided for the purpose.
DE
EN
FR
NL
ES
IT
DK
SE
NO
PL
UKR
HU
25

Publicité

Table des Matières
loading

Table des Matières