Silverline DIY Série Mode D'emploi page 7

324178
WARNING: Always wear ear protection where the sound level exceeds 85dB(A) and limit the time
of exposure if necessary. If sound levels are uncomfortable, even with ear protection, stop using the
tool immediately and check the ear protection is correctly fitted and provides the correct level of
sound attenuation for the level of sound produced by your tool .
WARNING: User exposure to tool vibration can result in loss of sense of touch, numbness, tingling
and reduced ability to grip . Long-term exposure can lead to a chronic condition . If necessary, limit
the length of time exposed to vibration and use anti-vibration gloves. Do not operate the tool with
hands below a normal comfortable temperature, as vibration will have a greater effect. Use the
figures provided in the specification relating to vibration to calculate the duration and frequency
of operating the tool .
Sound and vibration levels in the specification are determined according to international standards.
The figures represent normal use for the tool in normal working conditions. A poorly maintained,
incorrectly assembled, or misused tool, may produce increased levels of noise and vibration .
www.osha.europa.eu provides information on sound and vibration levels in the workplace that
may be useful to domestic users who use tools for long periods of time.
General Safety
WARNING: When using electric power tools, basic safety precautions should always be
followed to reduce the risk of fire, electric shock and personal injury including the following safety
information . Read all these instructions before attempting to operate this product and save these
instructions for future use .
WARNING: This appliance is not intended for use by persons (including children) with reduced,
physical or mental capabilities or lack of experience or knowledge unless they have been given
supervision or instruction concerning use of the appliance by a person responsible for their safety .
Children must be supervised to ensure that they do not play with the appliance.
CAUTION: Use the power tool, accessories and tool bits, etc. in accordance with these instructions,
taking into account the working conditions and the work to be performed. Use of the power tool for
operations different from those intended could result in a hazardous situation.
General Power Tool Safety Warnings
WARNING: Read all safety warnings, instructions, illustrations and specifications
provided with this power tool. Failure to follow all instructions listed below may result in electric
shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
The term "power tool" in the warnings refers to your mains-operated (corded) power tool or battery-
operated (cordless) power tool.
1) Work area safety
a) Keep work area clean and well lit. Cluttered or dark areas invite accidents.
b) Do not operate power tools in explosive atmospheres, such as in the presence of
flammable liquids, gases or dust. Power tools create sparks which may ignite the dust
or fumes.
c) Keep children and bystanders away while operating a power tool. Distractions can cause you
to lose control.
2) Electrical safety
a) Power tool plugs must match the outlet. Never modify the plug in any way. Do not use
any adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching
outlets will reduce risk of electric shock.
b) Avoid body contact with earthed or grounded surfaces, such as pipes, radiators, ranges
and refrigerators. There is an increased risk of electric shock if your body is earthed or grounded.
c) Do not expose power tools to rain or wet conditions. Water entering a power tool will increase
the risk of electric shock.
d) Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the
power tool. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled
cords increase the risk of electric shock.
e) When operating a power tool outdoors, use an extension cord suitable for outdoor use.
Use of a cord suitable for outdoor use reduces the risk of electric shock.
f) If operating a power tool in a damp location is unavoidable, use a residual current device
(RCD) protected supply. Use of an RCD reduces the risk of electric shock.
3) Personal safety
a) Stay alert, watch what you are doing and use common sense when operating a power
tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol
or medication. A moment of inattention while operating power tools may result in serious
personal injury.
b) Use personal protective equipment. Always wear eye protection. Protective equipment
such as dust mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate
conditions will reduce personal injuries.
c) Prevent unintentional starting. Ensure the switch is in the off-position before connecting
to power source and/or battery pack, picking up or carrying the tool. Carrying power tools
with your finger on the switch or energising power tools that have the switch on invites accidents.
d) Remove any adjusting key or wrench before turning the power tool on. A wrench or a key
left attached to a rotating part of the power tool may result in personal injury.
e) Do not overreach. Keep proper footing and balance at all times. This enables better control
of the power tool in unexpected situations.
f) Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves
away from moving parts. Loose clothes, jewellery or long hair can be caught in moving parts.
DIY 2hp Air Compressor 1500W
g) If devices are provided for the connection of dust extraction and collection facilities,
ensure these are connected and properly used. Use of dust collection can reduce
dust-related hazards.
4) Power tool use and care
a) Do not force the power tool. Use the correct power tool for your application. The correct
power tool will do the job better and safer at the rate for which it was designed.
b) Do not use the power tool if the switch does not turn it on and off. Any power tool that
cannot be controlled with the switch is dangerous and must be repaired.
c) Disconnect the plug from the power source and/or the battery pack from the power tool
before making any adjustments, changing accessories, or storing power tools. Such
preventive safety measures reduce the risk of starting the power tool accidentally.
d) Store idle power tools out of the reach of children and do not allow persons unfamiliar
with the power tool or these instructions to operate the power tool. Power tools are
dangerous in the hands of untrained users.
e) Maintain power tools. Check for misalignment or binding of moving parts, breakage of
parts and any other condition that may affect the power tool's operation. If damaged,
have the power tool repaired before use. Many accidents are caused by poorly maintained
power tools.
f) Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges
are less likely to bind and are easier to control.
g) Use the power tool, accessories and tool bits etc. in accordance with these instructions,
taking into account the working conditions and the work to be performed. Use of the power
tool for operations different from those intended could result in a hazardous situation.
h) Keep handles and grasping surfaces dry, clean and free from oil and grease. Slippery
handles and grasping surfaces do not allow for safe handling and control of the tool in
unexpected situations.
5) Service
a) Have your power tool serviced by a qualified repair person using only identical
replacement parts. This will ensure that the safety of the power tool is maintained.
Air Compressor Safety
When using machinery there are certain precautions that need to be taken in order to promote
safe operation. Always apply caution and respect to the machinery in use; if the following safety
precautions are ignored then damage or harm may be subjected to the operator, property or
bystander. It is in the interest of the user to read and pay attention to the following guidelines.
WARNING: This air compressor does not produce breathable air . Ingesting compressed air is
dangerous and can cause harm .
WARNING: Hot surfaces are present . DO NOT touch the motor, cylinder, heads and tubes as
harm may occur from burning .
WARNING: DO NOT use in potentially explosive atmospheres . Ensure that the atmosphere is free
from combustible gases and high concentrations of fine dust.
a) NEVER use compressed air for an unintended use. Compressed air has the potential to cause
harm. Avoid directing compressed air towards animals or persons, and NEVER release compressed
air towards the skin.
b) Ensure the work area is debris-free and dry. Untidy workspaces raise the potential for
injury.
c) Compressor should be assembled correctly. Using a compressor with guards, covers and
components removed is dangerous and may compromise the compressor's ability to perform.
d) DO NOT modify the compressor. Modifications to the compressor can be dangerous.
Unapproved modifications may not only hinder the compressor's ability to perform, but may
result in harm being caused to the operator. Repairs should be carried out by qualified personnel
only, using only manufacturer verified components.
e) Safety valves should not be modified or tampered with. Doing so can cause harm to the
operator and damage the air compressor. The maximum pressure is predetermined by the
manufacturer and should not be adjusted.
f) Keep bystanders away. Children and bystanders should be kept away from the compressor.
Unintentional interaction with the compressor is dangerous.
g) Do not abuse cable and hoses. Keep cables and hoses from heat, fluids and sharp edges. NEVER
attempt to strain the cables and hoses further than their fully extended reach, or allow them to
become tangled.
h) The air compressor should be stored correctly and depressurised. During storage and
transportation the compressor should be free from pressure. ALWAYS expel the air from the air
compressor after use.
i) Ensure that the pressure rating is compliant with the tool. ALWAYS check the air tool has a
safety working pressure that exceeds the maximum working pressure of the machine.
j) Use appropriate protection for the task at hand. Suitable protection for the application,
facemasks will protect from spray paints and goggles will protect from flying debris.
k) Operate the air compressor correctly. Adhere to the operation instructions provided in the
manual. NEVER allow children or persons unfamiliar with the operation of the air compressor use
this product.
l) Disconnect accessories with care. Depressurise the tank and ensure that the air supply is turned
OFF prior to removing accessories and air tools.
m) Wear appropriate clothing. Loose hanging clothing, jewellery or long hair can be caught in
moving parts.
silverlinetools.com
7