Setting Up The System - Denon ADV-700 Mode D'emploi

ENGLISH

10 SETTING UP THE SYSTEM

(1) System setup items
• Once all connections with other AV components have been completed as described in "CONNECTIONS" (see pages 8 to 15), make the various
settings described below on the monitor screen using the ADV-700's on-screen display function.
• Use the following buttons to set up the system:
Quick system
Speaker Configuration
Delay Time
Channel Level
DVD auto power off setting
Disc Setup
OSD Setup
Video Setup
Audio Setup
Ratings
Other Setup
22
POWER
VCR POWER
TV POWER
DISPLAY RETURN INPUT MODE SURROUND
MENU
ENTER
ENTER button
Press this to switch the display.
Also use this button to complete the setting.
MODE
VOLUME
BAND
CURSOR buttons
MUTE
CH SHIFT
and
NTSC/PAL STATUS
TU MEMO
and
SUB TITLE AUDIO ANGLE TOP MENU
PROG/DIRECT REPEAT A-B REPEAT RANDOM
CH.SELECT T.TONE SDB/TONE SURR.PARA
SETUP CDR/MD/TAPE TUNER/TV/VCR DVD
REMOCON MODE
SYSTEM SETUP button
REMOTE CONTROL UNIT RC-902
Press this to display the system setup menu.
System setup items and default values (set upon shipment from the factory)
Setup
Setup
Input the combination of speakers in your system and
their corresponding sizes (SMALL for regular speakers,
LARGE for full-size, full-range) to automatically set the
composition of the signals output from the speakers and the
frequency response.
This parameter is for optimizing the timing with which the
audio signals are produced from the speakers and subwoofer
according to the listening position.
At the listening position, listen to the test tones output
from the different speakers and set so that the playback
level from the different speakers is equal.
The power automatically switches to standby if no
operation is performed for 30 minutes while in the stop
mode with the function set to DVD.
Set the audio language, subtitle language and disc menu
language for when playing discs.
Set the on-screen display language and wallpaper for the
setup and operation screens.
Set the screen size and video system for the TV being used.
Set the digital audio signal format and the linear PCM
sampling frequency and bit conversion.
Make the playback restriction setting for DVDs with
restricted viewing and set the password required for
changing the setting.
Make the closed caption setting for DVDs. (A commercially
available decoder is required to display the closed captions.)
:Use these to move the cursors (
on the screen.
and right
:Use these to move the cursors (
and down on the screen.
Front Sp.
Small 9ft (2.7m) Small 8ft (2.4m)
Front Sp.
Small
Sw Freq. = 120 Hz / SW mode = None
Front & Subwoofer
9ft (2.7m)
Front L Center
0 dB 0 dB
power does not turn off automatically
Dialog
English
OSD Language
English
TV Aspect
4 : 3 PS
Digital Out
Normal
Rating Level
No Limit
) to the
and
left
and ) to the up
Default settings
Center Sp. Surround Sp.
Small 7ft (2.1m) Yes 9ft (2.7m)
Center Sp. Surround Sp. A / B
Small Small
Center
8ft (2.4m)
Front R Surround R Surround L
0 dB 0 dB 0 dB
Subtitle Disc Menu
OFF English
Wall Paper
Blue
TV Type
NTSC
LPCM Select
OFF
Pass Word Change
0000 (Default)
Closed Caption : OFF
Sub Woofer
Sub Woofer
Yes
Surround
7ft (2.1m)
Sub Woofer
0 dB