Denon ADV-700 Mode D'emploi page 41

(2) Auto decode surround mode settings
• The auto decode surround mode can be used for multi-channel and 2-channel stereo playback in the Dolby Digital, Dolby Pro Logic II, and DTS
surround modes, according to the input signal's format.
• Here we describe the 2-channel decode mode settings for setting whether to play 2-channel sources as such in the 2-channel mode or in the
multi-channel mode, as well as the settings for the Dolby Pro Logic II mode.
[1] 2-channel decode mode settings
• In the auto decode surround mode for the DVD, TV/DBS and V.AUX functions, you can select and set the auto stereo mode for playing 2-channel
sources in 2-channel stereo, or the Pro Logic II mode for using Dolby Pro Logic II processing to achieve multi-channel playback.
c 8 1:02:46
1
DVD
POWER
VCR POWER
TV POWER
+10
CALL
DISPLAY RETURN INPUT MODE SURROUND
MENU
3
ENTER
MODE
BAND
CH
NTSC/PAL
TU
SUB TITLE AUDIO ANGLE
PROG/DIRECT REPEAT A-B REPEAT
CH.SELECT T.TONE SDB/TONE
SETUP CDR/MD/TAPE TUNER/TV/VCR
1 With the function set to DVD, TV/DBS or V.AUX, select the
auto decode surround mode.
• "AUTO decode" is displayed, then the normal display
reappears.
FUNCTION
SURROUND
MODE /SELECT
Main unit Main unit
2 Press the SURR.PARA button on the remote control unit and
select the 2-channel decode mode.
2ch DEC A-ST
This can be selected when the digital input consists of no
signal, PCM signals, Dolby Digital 2-channel signals, as well
as when the analog input is selected.
1 1
TONE
0
1
FUNCTION
3
VOLUME
MUTE
SHIFT
STATUS
MEMO
TOP MENU
RANDOM
SURR.PARA
2
DVD
SURROUND
Remote control unit
SURR.PARA
Remote control unit
3
Select the desired 2-channel decode mode using the (
) cursor buttons on the remote control unit.
• The mode switches as follows each time one of the
buttons is pressed:
A-ST PL II
(auto stereo mode) (Pro Logic II mode)
When making parameter settings, the display will return to
the regular condition several seconds after the last button
was pressed and the setting will be completed.
Surround parameters (1)
(2-channel decode mode)
A-ST (auto stereo) mode
• 2-channel sources are played in 2-channel stereo.
When this mode is selected in the auto decode surround
mode, DVD, BS digital and other multi-channel sources are
played as such with multiple channels, while CDs and other
2-channel sources are automatically played in stereo.
For 2-channel Dolby Digital sources decoded in Dolby
Surround, identification signals are used to automatically
process the signals in Dolby Pro Logic II and play them in the
multi-channel mode.
PLII (Pro Logic II) mode
• Even 2-channel sources undergo Dolby Pro Logic II
processing and are played in the multi-channel mode.
When this mode is selected in the auto decode surround
mode, DVD, BS digital and other multi-channel sources are
played as such with multiple channels, and CDs and other 2-
channel sources also automatically undergo Dolby Pro Logic
II processing and are played in the multi-channel mode.
In the Dolby Pro Logic II mode, "CINEMA", "MUSIC" or
"DOLBY PL" (Pro Logic) can be selected and set. (See page
42 for setting instructions.)
NOTE:
• The 2-channel decode mode cannot be set when Dolby Digital
5.1-channel signals or DTS signals are being input.
• The 2-channel decode mode is stored separately for the DVD,
TV/DBS and V.AUX modes. (In the Dolby Pro Logic II mode, the
"CINEMA", "MUSIC" or "DOLBY PL" (Pro Logic) mode is also
stored in the memory.)
ENGLISH
and
Remote control unit
41