Denon ADV-700 Mode D'emploi page 69

6
Setting the timer start time
Set the hours' place to "PM12".
On PM12:00
7
Press the TIMER/SET button.
• The "PM12" in the hours' place is
stored in the memory.
On PM12:00
8
Set the minutes' place to "35".
On PM12:35
9
Press the TIMER/SET button.
• The start time is stored in the memory, and the end time
can now be set.
Off AM12:00
10
Setting the timer end time
Set the hours' place to "PM12".
Off PM12:00
11
Press the TIMER/SET button.
• The "PM12" in the hours' place is stored in the memory.
Off PM12:00
12
Set the minutes' place to "56".
Off PM12:56
13
Press the TIMER/SET button.
• The end time is stored in the
memory
• "T.Stdby" is displayed and the
timer can now be turned on or off.
14
FUNCTION
/SELECT
Main unit
TIMER/SET
Main unit
FUNCTION
15
/SELECT
Main unit
16
TIMER/SET
Main unit
When the display's
FUNCTION
when the power is in the standby mode, the timer will operate at
/SELECT
the same times every day. (Everyday timer)
If you do not want the timer to operate, press the TIMER/SET
button to display "T.Stdby" and set to "OFF".
(The display's
Main unit If you make a mistake when setting the timer, with steps 5 to 12
press the TIMER/SET button and hold it in for at least 2 seconds to
return to step 3, and start over from there.
NOTES:
• If the current time is not set, the timer standby setting cannot
be set to "ON". Be sure to set the current time before turning
TIMER/SET
on the timer.
• The timer will operate as long as it is turned on, even if the time
Main unit
setting is off due to a power failure. If you want the timer to
operate correctly, be sure the current time is properly set.
• If the timer start time is reached while the power is turned on,
FUNCTION
the set operates as set for the timer. (The timer settings are
/SELECT
given priority.)
• Be sure to set the power to the standby mode to operate the
timer.
Main unit
2 To Listen to the TUNER with the Everyday Timer
• Set "Timer TUNER" in Step 4, then press the TIMER/SET
button.
• "
P--FM....M
TIMER/SET
dial to select the preset channel on which you would like to
receive with the timer, then press the TIMER/SET button.
Main unit
• Hereafter, the same procedure is performed from Step 6.
Set the timer standby mode to on or off.
• "ON" or "OFF" (the one that has been selected) flashes.
Select "ON" if you want the timer to operate. (When set
to "ON", the mark appears on the display.)
T.StdbyON OFF
Select ON/OFF. If an operation is not performed within 4
seconds, the setting will be made automatically and there
will be a return to the normal display. (Operation 15 is not
necessary.)
Press the TIMER/SET button.
• This completes the setting of the
timer.
Turn off the main unit's power.
• The power is set to the standby
mode.
• If the timer standby mode is set to
"ON", the power LED is lit orange.
• The disc starts playing when the
timer start time is reached.
mark is lit or the power LED is lit orange
mark turns off.)
" will be displayed. Use the FUNCTION/SELECT
ENGLISH
FUNCTION
/SELECT
Main unit
TIMER/SET
Main unit
ON / STANDBY
Orange
Main unit
69