Denon ADV-700 Mode D'emploi page 29

Ampli-syntoniseur surround dvd
Masquer les pouces Voir aussi pour ADV-700:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

[3] Setting the channel level
• Use this setting to adjust so that the playback level between the
different channels is equal.
• From the listening position, listen to the test tones produced from
the speakers to adjust the level.
• The level can also be adjusted directly from the remote control unit.
(For details, see page 40.)
1
To perform these operations from places other than the
system setting change menu, see page 26.
2
At the SYSTEM SETUP MENU select "CHANNEL LEVEL".
Remote control unit
• Switch to the CHANNEL LEVEL screen.
C H A N N E L L E V E L
TEST TONE MODE
T ES T T ON E M OD E
L E V E L C L E A R
L E V E L C L E A R
T E S T T O N E S T A R T
T E S T T O N E S T A R T
F R O N T L
F R O N T L
CENTER
CENTER
F R O N T R
F R O N T R
SURROUND R
SURROUND R
SURROUND L
SURROUND L
SUBWOOFER
SUBWOOFER
SELECT :
3
Select "TEST TONE MODE".
• Select the mode.
Select "AUTO" or "MANUAL".
• AUTO: Adjust the level while listening to the test tones produced
automatically from the different speakers.
• MANUAL: Select the speaker from which you want to produce the
test tone to adjust the level.
4
If "YES" is selected at "LEVEL CLEAR", the level settings for
all the speakers are set to 0 dB.
B "YES"
: The levels of the different speakers are all set to 0dB.
B "NO"
: The speakers stay at their currently set levels.
5
Adjusting the channel levels in the "test tone" mode
• Set the "TEST TONE START" mode using the
cursor buttons, then select "YES" with the
button to output test tones.
ENTER
Remote control unit
B
AUTO
AUTO MANUAL
MANUAL
0 d B
0 d B
0 d B
0 d B
0 d B
0 d B
0 d B
0 d B
0 d B
0 d B
0 d B
0 d B
FINISH: ENTER BUTTON
Remote control unit
and
cursor
q When "AUTO" is selected in the "TEST TONE MODE"
6
C H A N N E L L E V E L
TE ST T O NE MO DE
TEST TONE MODE
L E V E L C L E A R
L E V E L C L E A R
T E S T T O N E S T A R T
T E S T T O N E S T A R T
F R O N T L
F R O N T L
CENTER
CENTER
F R O N T R
F R O N T R
SURROUND R
SURROUND R
SURROUND L
SURROUND L
SUBWOOFER
SUBWOOFER
SELECT :
• Test tones are automatically emitted from the different speakers.
• The test tones are emitted from the different speakers in the
following order, at 4-second intervals the first time and second
time around, 2-second intervals the third time around and on:
Front L
Subwoofer
Surround L
• Use the CURSOR buttons to adjust all the speakers to the same volume.
• The volume can be adjusted between –12 dB and +12 dB in units of 1 dB.
w When the "MANUAL" mode is selected
C H A N N E L L E V E L
TE ST T O NE M OD E
TEST TONE MODE
L E V E L C L E A R
L E V E L C L E A R
T E S T T O N E S T A R T
T E S T T O N E S T A R T
F R O N T L
F R O N T L
CENTER
CENTER
F R O N T R
F R O N T R
SURROUND R
SURROUND R
SURROUND L
SURROUND L
SUBWOOFER
SUBWOOFER
SELECT :
• Use the CURSOR left and right to select the speaker for which you
want to output test tones, then use the CURSOR up and down to
adjust so that the volume of the test tones from the various
speakers is the same.
7
After the above settings are completed, press the ENTER
button.
• The "SYSTEM SETUP MENU" screen reappears.
To cancel the setting after adjusting
Display the channel level adjustment screen, then use the
,
and
cursor buttons to select "LEVEL CLEAR" and
"YES". The level settings for all the speakers are set to 0 dB.
NOTE:
• When you adjust the channel levels while in the SYSTEM SETUP
CHANNEL LEVEL mode, the channel level adjustments made
will affect ALL surround modes. Consider this mode a Master
Channel Level adjustment mode.
• After you have completed the SYSTEM SETUP CHANNEL LEVEL
adjustments, you can then activate the individual surround
modes and adjust channel levels that will be remembered for
each of those modes. Then, whenever you activate a particular
surround sound mode, your preferred channel level adjustments
for just that mode will be recalled. Check the instructions for
adjusting channel levels within each surround mode on page 40.
ENGLISH
B
AUTO MANUAL
AUTO
MANUAL
Y E S
Y E S
+ + 1 0 d B
1 0 d B
0 d B
0 d B
0 d B
0 d B
0 d B
0 d B
0 d B
0 d B
0 d B
0 d B
FINISH: ENTER BUTTON
Center
Front R
Surround R
B
AUTO MANUAL
AUTO
MANUAL
Y E S
Y E S
+ + 1 0 d B
1 0 d B
0 d B
0 d B
0 d B
0 d B
0 d B
0 d B
0 d B
0 d B
0 d B
0 d B
FINISH: ENTER BUTTON
,
29

Publicité

Chapitres

Table des Matières
loading

Table des Matières