Setting Up The System - Denon AVR-1804 Mode D'emploi

ENGLISH

10 SETTING UP THE SYSTEM

• Once all connections with other AV components have been completed as described in "CONNECTIONS" (see pages 10 to 18), make the
various settings described below on the display.
These settings are required to set up the listening room's AV system centered around the this unit.
• Use the following buttons to set up the system:
1
Set the slide switch to "AUDIO".
2
Use the following buttons to set up the system:
• System setup items and default values (set upon shipment from the factory)
Input the combination of speakers in your system and their
Speaker corresponding sizes (SMALL for regular speakers, LARGE for full-
Configuration size, full-range) to automatically set the composition of the signals
output from the speakers and the frequency response.
Subwoofer mode This selects the subwoofer speaker for playing deep bass signals.
Crossover Set the frequency (Hz) below which the bass sound of the various
Frequency speakers is to be output from the subwoofer.
This parameter is for optimizing the timing with which the audio
Delay Time signals are produced from the speakers and subwoofer according
to the listening position.
This adjusts the volume of the signals output from the speakers
Test Tone and subwoofer for the different channels in order to obtain
optimum effects.
Digital In This assigns the digital input jacks for the different
Assignment input sources.
Video In This assigns the component video input jacks for
Assignment the different video input sources.
Auto Surround
Auto surround mode function setting.
Mode
Ext. In SW Level Set the Ext. In Subwoofer channel playback level.
Power AMP Set this to switch the surround back channel's power amplifier for
Assignment use for Zone 2.
This sets whether or not to display the on-screen display that
On Screen
appears on the monitor screen when the controls on the remote
Display
control unit or main unit are operated.
Auto Tuner
FM stations are received automatically and stored in the memory.
Presets
20
System setup
Input source
Digital
Inputs
Input source
Component
Inputs
SYSTEM SETUP button
Press this to display the system setup on the display.
CURSOR buttons ( , , , )
• ª 0 1
Press this change what appears on the display.
ENTER button
Press this to switch the display.
Also use this button to complete the setting.
Front Sp. Center Sp.
Large Small
Front L Front R Center
12 ft 12 ft 12 ft
Front L Front R Center
0 dB 0 dB 0 dB
CD DVD/VDP
COAXIAL OPTICAL 1
DVD/VDP TV/DBS
VIDEO 1 VIDEO 2
A1 ~ A8 87.5/89.1/98.1/107.9/90.1/90.1/90.1/90.1 MHz
B1 ~ B8 520/600/1000/1400/1500/1710 kHz, 90.1/90.1 MHz
C1 ~ C8 90.1 MHz
D1 ~ D8 90.1 MHz
E1 ~ E8 90.1 MHz
Default settings
Surround Sp. Surround Back Sp.
Small Small
LFE (Normal)
80 Hz
Surround L Surround R Surround Back
10 ft 10 ft 10 ft
Surround L Surround R Surround Back
0 dB 0 dB 0 dB
TV/DBS VCR-1 VCR-2
OPTICAL 2 OFF OFF
VCR-1 VCR-2 V. AUX
OFF OFF OFF
Auto Surround Mode = ON
Ext. In SW Level = +15 dB
Surround Back
ON
Subwoofer
Yes
Subwoofer
12 ft
Subwoofer
0 dB
CDR/TAPE
OPTICAL 3
—
—