ENGLISH
Dolby Digital mode (only with digital input) and DTS Surround (only with digital input)
1
Select the input source.
Playback with a digital input
q Select an input source set to digital (COAXIAL/OPTICAL)
(see page 25).
Example: DVD
(Main unit)
w Set the input mode to "AUTO" or DTS.
(Main unit)
2
Select the Dolby/DTS Surround mode.
(Main unit)
When performing this operation from the main unit's panel,
press the SURROUND MODE button, then turn the SELECT
knob and select Dolby Pro Logic
(Main unit)
3
Play a program source with the
DIGITAL
Light
Light
Operate the SURROUND BACK button to switch Surround
Back CH ON/OFF.
(Main unit)
• Lights when the SURROUND BACK button is on.
48
(Remote control unit)
(Remote control unit)
(Remote control unit)
II
or DTS NEO:6.
(Main unit)
,
mark.
• The Dolby Digital indicator lights when
playing Dolby Digital sources.
• The DTS indicator lights when playing
DTS sources.
(Remote control unit)
1
2
1
7
6
1
Light
1 3
3
2
2
4, 5
5
4, 5
6
3
5
2, 6