Dräger Panorama Nova P Notice D'utilisation page 15

2.5 Approvals
The full face masks are approved according to:
EN 136:1998 Cl. 3+

(EU) 2016/425

Declaration of conformity: see www.draeger.com/product-certificates
In addition, the full face masks comply with the requirements for flame
engulfment in EN 137.
The full face masks may only be used with approved overpressure
self-contained breathing apparatuses
equipment.
The full face masks have been tested for use in explosion-hazard
areas in accordance with 2014/34/EU and have the following
protection classes:
Full face masks with visors marked "L":
I M1 I M1
1)
II 1 G IIC T6 II 1 G IIB T6
II 1D II 1D
1) –30 °C ≤ Ta ≤ +60 °C
Full face masks with visors marked "PC" or "PC/CC":
I M1 I M1
1)
II 1 G IIB T6 II 1 G IIA T6
II 1D II 1D
1) –30 °C ≤ Ta ≤ +60 °C
Panorama Nova P
or overpressure airline
I M1
1) 1)
II 1 G IIA T6
II 1D
1)
(approved by Dekra Exam)
2.6 Type-identical markings
The full face masks are marked as follows:
Connector P
EPDM or SI
Mask body EN 136 CL. 3+
CExxxx (notified body in Europe)
PC (uncoated) or PC/CC (anti-fog coating
on the inside and anti-scratch coating on
Visor
the outside) or L
F (fire brigade)
Visor frame K/rt
15