Dräger Panorama Nova P Notice D'utilisation page 104

2.5 Type-identical identification marking
The facepiece is marked as follows:
Equipment connector P
EPDM or SI
Facepiece body EN 136 CL. 3+
CExxxx (Notified Body in Europe)
PC (uncoated) or PC/CC (anti-fogging
coating inside/anti-scratch coating
Visor
outside) or L
F (fire brigade)
Visor frame K/rt
104
3
3.1


3.2
i
1. Loosen the facepiece from the standby position.
2. Pull the head harness apart then put
3. Pull the head harness over your head
4. Adjust the facepiece.
(Use Instructions for NIOSH-approved full facepieces)
Use
Before use
Strictly follow OSHA 1910.134 and other valid national regulations
for the use of respiratory equipment.
Before using the facepiece for the first time, perform a leak test
(see Chap. 4.3.4 on Page 108).
Donning the facepiece
WARNING
!
Beards and sideburns in the sealing range of the facepiece
will cause leaks! Therefore the facepiece should not be used
by anyone with facial hair of this sort. Spectacle frames in the
sealing range also cause leaks. Use facepiece spectacles.
NOTICE
i
At very low temperatures, the user can reduce facepiece
fogging by either inhaling or holding his breath when donning
the facepiece.
your chin into chin cup of the facepiece
body.
and draw backwards.
Panorama Nova P