Maintenance - Ryobi P531 Manuel D'utilisation

WARNING:
When servicing, use only identical replacement parts.
Use of any other part could create a hazard or cause
product damage.
GENERAL MAINTENANCE
Avoid using solvents when cleaning plastic parts. Most
plastics are susceptible to damage from various types of
commercial solvents and can be damaged by their use. Use
clean cloths to remove dirt, dust, oil, grease, etc.
BITS
Get faster and more accurate cutting results by keeping bits
clean. Remove all accumulated build-up from bits after each
use. Replace bits when they become dull.
NOTE: ILLUSTRATIONS START ON PAGE 8
AFTER FRENCH AND SPANISH LANGUAGE SECTIONS.

MAINTENANCE

CAUTION:
The bit flutes are sharp and should be handled with
caution.
COLLET
From time to time, it also becomes necessary to clean the
collet and collet nut. To do so, simply remove collet nut
and collet from the shaft and clean the dust and chips that
have collected. Then return collet nut to its original position.
Tighten collet nut on collet without a bit installed.
7