IWC Schaffhausen INGENIEUR CHRONOGRAPH SPORT Mode D'emploi page 27

– Turn the crown to the right to advance the date display in steps.
Set the display to yesterday's date.
– Pull out the crown to position 2. This will stop the movement.
To set the time accurately to the second, it is best to stop the
movement as the seconds hand passes 60.
– Turn the hands forward until the date display changes to today's
date. The hands will now be positioned between 12 midnight
and 1 a.m.
– Now turn the hands forward to the correct time. If you are
setting the watch in the afternoon, you must turn the hands
past 12 noon again.
– Push the crown back to position 0 to start the movement.
– Now push the crown to position X and secure it by simultan-
eously turning it to the right.
Important: Although the watch is water-resistant in positions 0,
1 and 2, the crown should always be screwed in again for normal
use (position X).
I N G E N I E U R C H R O N O G R A P H S P O R T
— 2 7 —