IWC Schaffhausen INGENIEUR CHRONOGRAPH SPORT Mode D'emploi page 24

— 2 4 —
F U N C T I O N S O F T H E C R O W N
X 0 1 2
Normal position (screwed in)
X —
Winding position
0 —
Date setting
1 —
Time setting
2 —
N O R M A L P O S I T I O N
This watch has a screw-in crown. Screwing the crown in to its
normal position (X) prevents the inadvertent adjustment of the
time or date and also acts as a double seal to prevent water from
seeping into the case. To release the crown, unscrew it by turning
it to the left, where it automatically assumes position 0, the winding
position. By depressing the crown in position X and turning it to the
right at the same time, it is screwed down firmly again and secured.
I N G E N I E U R C H R O N O G R A P H S P O R T