Removing The Bicycle Carrier From The Trailer Tow Bar - EUFAB PREMIUM TG Manuel De L'opérateur

CAUTION!
Personal injury or material damage due to the sudden
folding down of the carrier.
Body parts or objects which are under or in front of the carrier
may be crushed when it is folded down.
• Make sure that there is nothing beneath the carrier.
• Keep all body parts – particularly your head – clear, and
maintain a suitably safe distance.
• Hold the carrier firmly onto the bicycle when folding it
down. Release the lock by foot, and then tilt the carrier
downwards by hand (Figure 27).
Figure 27: Folding back the bicycle carrier
CAUTION!
Personal injury or material damage possible when
folding up the carrier.
Body parts or objects which are between the carrier and the
vehicle during folding may be crushed.
• Make sure that there is nothing between the carrier and the
vehicle.
• Remove any objects between the carrier and the vehicle.
WARNING!
Personal injury or material damage possible due to
loss of the bicycle carrier while driving.
A bicycle carrier which is not folded up may result in the
detachment of the carrier or the tow bar.
• Fold up the bicycle carrier before driving (Figure 28).
• Check that the bicycle carrier is correctly in place. This will be
confirmed by an audible click. Lock the carrier, if necessary,
as described above.
Figure 28: Folding up the bicycle carrier

5.8 REMOVING THE BICYCLE CARRIER FROM THE TRAILER TOW BAR

To remove the bicycle carrier, repeat the installation steps in reverse order.
• Unlock the licence plate holder, and rotate it into the storage position.
• Collapse the bicycle carrier.
• Pull the plug out of your vehicle's trailer socket.
• Raise the lever of the quick release, and remove the carrier from the tow
bar.
Figure 29: Unlock and rotate the license plate holder
Figure 30: License plate holder in the storage position
Figure 31: Collapsing the bicycle carrier
Figure 32: Easy to carry and store, thanks to the great folding system.
19