Ryobi CPL-180M Manuel D'utilisation page 14

GB
F D
GENERAL SAFETY RULES
f) Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting edges are
less likely to bind and are easier to control.
g) Use the power tool, accessories and tool bits etc.,
in accordance with these instructions and in the
manner intended for the particular type of power
tool, taking into account the working conditions
and the work to be performed. Use of the power
tool for operations different from intended could result
in a hazardous situation.
5) BATTERY TOOL USE AND CARE
a) Ensure the switch is in the off position before
inserting battery pack. Inserting the battery pack
into power tools that have the switch on invites
accidents.
b) Recharge only with the charger specified by the
manufacturer. A charger that is suitable for one type
of battery pack may create a risk of fire when used
with another battery pack.
c) Use power tools only with specifically designated
battery packs. Use of any other battery packs may
create a risk of injury and fire.
d) When battery pack is not in use, keep it away
from other metal abjects like paper clips, coins,
keys, nails, screws, or other small metal objects
that can make a connection from one terminal to
another. Shorting the battery terminals together may
cause burns or a fire.
e) Under abusive conditions, liquid may be ejected
from the battery; avoid contact. If contact
accidentally occurs, flush with water. If liquid contacts
eyes, additionally seek medical help. Liquid ejected
from the battery may cause irritation or burns.
6) SERVICE
a) Have your power tool serviced by a qualified
repair person using only identical replacement
parts. This will ensure that the safety of the power
tool is maintained.
7) SPECIAL RULES
a) Wait for the cutter to stop before setting the tool
down. An exposed cutter may engage the surface
leading to possible loss of control and serious injury.
E I P NL S DK N FIN GR
English
SPECIFICATIONS
Voltage :
No load speed :
Max. planing depth :
Max. planing width :
Max. rabbet depth :
Battery pack (Not Included) : BPP-1815M/BPP-1817M
Charger (Not Included) :
DESCRIPTION
1. Wrench
2. Depth Adjust Knob
3. Trigger Switch
4. Rear Handle
5. Lock-off Button
6. Dust Bag
7. Kick Stand
8. Blade
9. Edge Guide
10. Collar
11. Battery Pack (Not Included)
12. Latch
13. Bracket
14. Knob Bolt
15. Knob Nut
16. Carriage Head Bolt
17. Front Shoe
18. Blade Clamp
19.Blade Holder
20. Belt Cover
21. Large Pulley
22. Small Pulley
FEATURES
KNOW YOUR PLANER
Before attempting to operate your planer, familiarize
yourself with all operating features and safety
requirements. However, do not let familiarity with the tool
make you careless.
9
RO
H CZ RUS
WARNING
If any parts are missing, do not operate your
planer until the missing parts are replaced.
Failure to do so could result in possible serious
personal injury.
HR
PL SLO
18V
10,000 /min
0.4 mm
50.8 mm
12.7 mm
BC-1800/BC-1815S
TR