English; Safety Notes; Product Description And Specifications - Bosch GLL 3 X Professional Notice Originale

OBJ_BUCH-1772-005.book Page 6 Wednesday, August 31, 2016 2:31 PM

6 | English

English

Safety Notes

All instructions must be read and observed
in order to work safely with the measuring
tool. The integrated protections in the meas-
uring tool may be compromised if the meas-
uring tool is not used in accordance with the
instructions provided. Never make warning signs on the
measuring tool unrecognisable. STORE THESE INSTRUC-
TIONS IN A SAFE PLACE AND INCLUDE THEM WITH THE
MEASURING TOOL WHEN GIVING IT TO A THIRD PARTY.
 Caution – The use of other operating or adjusting
equipment or the application of other processing
methods than those mentioned here can lead to
dangerous radiation exposure.
 The measuring tool is provided with a warning label
(marked with number 9 in the representation of the
measuring tool on the graphics page).
IEC 60825-1: 2014
<1mW, 635 nm
 If the text of the warning label is not in your national lan-
guage, stick the provided warning label in your national
language over it before operating for the first time.
Do not direct the laser beam at persons
or animals and do not stare into the di-
rect or reflected laser beam yourself, not
even from a distance. You could blind
somebody, cause accidents or damage
your eyes.
 If laser radiation strikes your eye, you must deliberate-
ly close your eyes and immediately turn your head
away from the beam.
 Do not make any modifications to the laser equipment.
 Do not use the laser viewing glasses as safety goggles.
The laser viewing glasses are used for improved visualisa-
tion of the laser beam, but they do not protect against laser
radiation.
 Do not use the laser viewing glasses as sun glasses or in
traffic. The laser viewing glasses do not afford complete
UV protection and reduce colour perception.
 Have the measuring tool repaired only through quali-
fied specialists using original spare parts. This ensures
that the safety of the measuring tool is maintained.
 Do not allow children to use the laser measuring tool
without supervision. They could unintentionally blind
other persons or themselves.
 Do not operate the measuring tool in explosive environ-
ments, such as in the presence of flammable liquids,
gases or dusts. Sparks can be created in the measuring
tool which may ignite the dust or fumes.
1 609 92A 30A | (31.8.16)
Keep the measuring tool and the laser tar-
get plate 11 away from cardiac pacemak-
ers. The magnets of the measuring tool and la-
ser target plate generate a field that can impair
the function of cardiac pacemakers.
 Keep the measuring tool and the laser target plate 11
away from magnetic data medium and magnetically-
sensitive equipment. The effect of the magnets of the
measuring tool and laser target plate can lead to irreversi-
ble data loss.
Product Description and
Specifications
Intended Use
The measuring tool is intended for determining and checking
horizontal and vertical lines.
The measuring tool is suitable exclusively for operation in
enclosed working sites.
Product Features
The numbering of the product features shown refers to the
illustration of the measuring tool on the graphic page.
1 Exit opening for laser beam
2 Automatic levelling indicator
3 On/Off button/operating mode button
4 Switch for automatic levelling/locking the levelling unit
5 Tripod mount 1/4"
6 Latch of battery lid
7 Battery lid
8 Serial number
9 Laser warning label
10 Magnets
11 Laser target plate*
12 Measuring plate with stand*
13 Universal holder*
14 Laser viewing glasses*
15 Tripod*
* The accessories illustrated or described are not included as
standard delivery.
Technical Data
Cross-line Laser
Article number
1)
Working range to approx.
Levelling Accuracy
Self-levelling range, typically
Levelling duration, typically
1) The working range can be decreased by unfavourable environmental
conditions (e.g. direct sun irradiation).
2) The width of the laser line depends on the surface characteristics and
on the ambient conditions.
The measuring tool can be clearly identified with the serial number 8 on
the type plate.
GLL 3 X
3 601 K63 C..
15 m
±0.5 mm/m
±4°
<6 s
Bosch Power Tools