Operation; Step-By-Step Use - Program 1 With Hand Switch - DJO Global Cefar Femina Mode D'emploi

5. OPERATION

STEP-BY-STEP USE – PROGRAM 1 WITH HAND SWITCH
40
Program 1 is specifically designed to combat labour pain during childbirth. Two different amplitude lev-
els are set, one for basic stimulation (between contractions) and one for intensive stimulation (during
contractions). The stimulator is used together with a hand switch which lets you easily switch between
the two stimulation levels.
1. INSERT THE BATTERIES
Insert the batteries (see chapter REPLACEMENT OF BATTERIES).
2. ATTACH THE ELECTRODES
A. Connect the electrodes to
the cable.
3. CONNECT THE HAND SWITCH
4. SWITCH THE STIMULATOR ON
Press the ON/OFF button
minating the stimulation at all times, even when the key lock is acti-
vated.
Always switch the stimulation off before removing electrodes from
the skin.
B. Attach the electrodes to
your body.
. This button can be used for ter-
AUTO AUTO
S
P
C. Connect the cable(s) to the
CEFAR FEMINA.