Display Symbols - DJO Global Cefar Femina Mode D'emploi

4. OVERVIEW/DISPLAY SYMBOLS
1. BROKEN CIRCUIT
Broken circuit. The reason for a broken circuit may be too high resistance or cable breakage. See chapter
TROUBLESHOOTING.
2. PAUSE
Paused program.
3. KEY LOCK
Activated key lock. The key lock is automatically activated if no key is pressed for 10 seconds.
Deactivate the key lock by pressing the left or right DECREASE button.
4. BATTERY STATUS
Empty batteries. This symbol is shown when the batteries are almost empty.
5. PROGRAM NUMBER (left and right channel)
Selected program number.
6. REMAINING TIME (left and right channel)
Remaining program time in minutes and seconds. Time is flashing during timer setting.
7. AMPLITUDE BARGRAPH (left and right channel)
Selected amplitude as a bargraph.
8. AMPLITUDE LEVEL (left and right channel)
Selected amplitude in mA.
9. BASIC/INTENSIVE STIMULATION - PROGRAM 1
Indication for basic/intensive stimulation in Program 1. The upper part of the symbol is flashing during intensive
stimulation and the bottom part during basic stimulation.
CONTRACTION/ACTIVE REST - PROGRAM 5
Contraction/Active Rest indication for Program 5. The upper part of the symbol is flashing during muscle
contraction and the bottom part during Active Rest.
1 2 3
5
7 8 9
4 1
6
8 7
39