Timer; Program Pause - DJO Global Cefar Femina Mode D'emploi

Program 5: In this program muscle contractions alternates with periods of Active Rest. Since stimula-
tion is active also during Active Rest, you have to set two different amplitude levels. Set the amplitude
for muscle contractions when the upper part of the Contraction/Active Rest symbol is flashing and the
amplitude for Active Rest when the bottom part of the symbol is flashing.
The treatment time is preset, but can be changed by using the timer function, see section TIMER.
An automatically activated key lock prevents unintentional changes during treatment. The key lock is
activated if no button is pressed for 10 seconds. Press any of the DECREASE buttons
the key lock.
When the program is finished, Remaining time "00:00" is flashing on the display.
The last used program is saved when the stimulator is turned off and then pre-selected the next time
the stimulator is turned on.
The stimulator turns off after five minutes of inactivity to spare batteries.

TIMER

The treatment time is preset to 30 minutes except for P1, which has no preset time limit, but the timer
function allows you to set the treatment time yourself for all programs. You have the option to change
the timing from "- -" to 60 minutes. If you choose to stay on "- -", the stimulation will go on until you
stop the stimulation manually.
To set the timer:
1. Select a program and start the stimulation, see section STEP-BY-STEP USE.
2. Press the TIMER button
3. Increase the time by pressing the right INCREASE button
each time you press the button. Decrease the time by pressing the right DECREASE button
AUTO AUTO
The time is decreased by 1 minute each time you press the button. The time is flashing on the display,
S
P
while setting the timer.
4. Press the TIMER button
AUTO AUTO

PROGRAM PAUSE

S
P
You can pause the programs up to five minutes.
To pause a program:
1. If key lock is on, press any of the DECREASE buttons
2. Press the PROGRAM button
Start stimulation again by pressing the PROGRAM button
If stimulation is paused for more than five minutes, the stimulator turns off automatically to
spare batteries.
to initiate the timer function.
to confirm the timer setting.
AUTO AUTO
to pause the program.
S
P
. The time is increased by 1 minute
AUTO AUTO
P S
to deactivate it.
AUTO AUTO
.
S
P
AUTO AUTO
S
P
to deactivate
AUTO AUTO
S
P
.
AUTO AUTO
P S
43