4-Pole Interferential Current (Classical); Dipole Vector Manual - Enraf Nonius Sonopuls 492 Mode D'emploi

5.2.2.9. 4-pole interferential current (classical)

• Push button [7] to select . Use the central controller [16] to link the channels;
• Push button [8], select
• Selection of 4-pole interferential current:
Select
• Carrier wave selection:
Push button [9] to select
• Beat frequency:
Select
• Modulation frequency (spectrum):
Select
• Modulation time (spectrum):
Select with button [11] and adjust its value with the central controller [16];
• Treatment time:
Select
• Select CC or CV with button [13] and the central controller [16];
• Adjust the current intensity with controller [17];
• Balance:
Select with button [10] and adjust its value with the central controller [16]
5.2.2.10.Isoplanar vector
• Push button [7] to select . Use the central controller [16] to link the channels;
• Push button [8], select
• Selection of isoplanar vector current:
Select with the central controller [16] and press button [14] to accept;
• Carrier wave selection:
Push button [9] to select
• Beat frequency:
Select
• Modulation frequency (spectrum):
Select
• Modulation time (spectrum):
Select with button [11] and adjust its value with the central controller [16];
• Treatment time:
Select
• Select CC or CV with button [13] and the central controller [16];
• Adjust the current intensity with controller [17]

5.2.2.11.Dipole vector manual

• Push button [7] to select . Use the central controller [16] to link the channels;
• Push button [8], select
• Selection of manual dipole vector current:
Select with the central controller [16] and press button [14] to accept;
• Carrier wave selection:
Push button [9] to select
• Beat frequency:
Select
• Modulation frequency (spectrum):
Select
• Modulation time (spectrum):
Select with button [11] and adjust its value with the central controller [16];
• Treatment time:
Select
• Select CC or CV with button [13] and the central controller [16];
• Adjust the current intensity with controller [17];
• Dipole vector:
Select
40
with the central controller [16] and press button [14] to accept;
with the central controller [16] and press button [14] to accept;
(kHz) and adjust its value with the central controller [16];
with button [10] and adjust its value with the central controller [16];
with button [10] and adjust its value with the central controller [16];
with button [12] and adjust its value with the central controller [16];
with the central controller [16] and press button [14] to accept;
(kHz) and adjust its value with the central controller [16];
with button [10] and adjust its value with the central controller [16];
with button [10] and adjust its value with the central controller [16];
with button [12] and adjust its value with the central controller [16];
with the central controller [16] and press button [14] to accept;
(kHz) and adjust its value with the central controller [16];
with button [10] and adjust its value with the central controller [16];
with button [10] and adjust its value with the central controller [16];
with button [12] and adjust its value with the central controller [16];
with button [10] and adjust the position with the central controller [16]