Storing The Product; Troubleshooting - Ryobi RY43200 Manuel D'utilisation

STORING THE PRODUCT

 Disconnect from power supply and store out of
the reach of children.
PROBLEM
Bar and chain
running hot and
smoking.
Motor runs,
but chain is not
rotating.
MAINTENANCE

TROUBLESHOOTING

CAUSE
Check chain tension
for overtightened
condition.
Oil reservoir empty.
Chain tension too
tight.
Check guide bar and
chain assembly.
Check guide bar and
chain for damage.
For any questions about operating or maintaining your product,
Your product has been fully tested prior to shipment to ensure
Page 22 — English
 Clean all foreign material from the product. Store
idle unit indoors in a dry, well-ventilated area
that is inaccessible to children. Keep away from
corrosive agents such as garden chemicals and
de-icing salts.
Tension chain. Refer to Chain Tension earlier in this
manual.
Check oil reservoir.
Retention chain. Refer to Chain Tension earlier in this
manual.
Refer to Replacing the Bar and Chain earlier in this
manual.
Inspect guide bar and chain for damage.
CALL US FIRST
call the Ryobi Help Line!
®
your complete satisfaction.
REMEDY